Difference between revisions of "Bucket of Oil"

From WonderCraft
Jump to navigation Jump to search
(How to get oil out of the ground and into buckets)
 
Line 23: Line 23:
  
 
[[File:gps200setup.png|500px]]
 
[[File:gps200setup.png|500px]]
 +
 +
Use your fuel to get the network running.
 +
 +
[[File:coalgenrunning.png|500px]]
 +
 +
 +
Once your network is running you will be able to view your control panel and it should look something like this:
 +
 +
[[File:gpscontrolpannel.png|500px]]
 +
 +
[[File:gpscontrolpanexample.png|500px]]
 +
 +
 +
Once you get group one running, go back down to the ground and pick a chunk to set up on to check for oil.
 +
 +
Set the Geo Scanner down and right click it to see the results:
 +
[[File:geoscanresults.png|500px]]
 +
 +
In this example there are 10 buckets of oil available. Now just set up the rest of group 2 so you can get the oil.
 +
 +
[[File:oilongroundsetup.png|500px]]
 +
 +
After adding fuel to the coal generator and letting the voltage go up, put your buckets into the oil pump.
 +
 +
[[File:oilpumpworking.png|500px]]
 +
 +
After you collect your buckets of oil from that chunk, you can just take up the machines you have on the ground and move them to another chunk and repeat.
 +
 +
After you get all you want, just take your machines down and please don't leave your platform behind if it's not your land.

Latest revision as of 18:03, 26 June 2020

Follow these steps to get buckets of oil:

Get yourself some buckets to put the oil in.

Then gather these machines:

Electricgpskit.png

When you have your supplies find a good place to look for oil. It is said that oceans are a good place to find it.

When you find a spot you like do this to prepare:

Hit F3 and g (or ctl + F3 + g) to see the chunk boundaries and build you a platform at Y=200:

Chunkbars.png

If not sure how high you are at - hit F3 and in the upper left it will tell you.

Y200.png


On your platform, set up Group 1 to give you power to the control panel.

Gps200setup.png

Use your fuel to get the network running.

Coalgenrunning.png


Once your network is running you will be able to view your control panel and it should look something like this:

500px

Gpscontrolpanexample.png


Once you get group one running, go back down to the ground and pick a chunk to set up on to check for oil.

Set the Geo Scanner down and right click it to see the results: Geoscanresults.png

In this example there are 10 buckets of oil available. Now just set up the rest of group 2 so you can get the oil.

Oilongroundsetup.png

After adding fuel to the coal generator and letting the voltage go up, put your buckets into the oil pump.

Oilpumpworking.png

After you collect your buckets of oil from that chunk, you can just take up the machines you have on the ground and move them to another chunk and repeat.

After you get all you want, just take your machines down and please don't leave your platform behind if it's not your land.